扒渣机 耙斗机 电耙子 四不像 四不像矿车 专业制造

Scraperwinch, not only can be used in coal mines, it is also used in metal and nonmetal mines, especially in the Sichuan area of phosphate rock and lead and zinc ore and copper mine use more widely. Scraperwinch sub can be used in slope less than 44 degrees slope above slag skimming will take down, and then load operation or grilled to shuttle groove inside. Scraperwinch is easy to operate, while Scraperwinch has nothing to do with the problem, after all, is a very mature mechanical products. Our company specializing in the production of manufacturing: scraper winch, Scraperwinch sub it is the earliest generation of scraper device, at the beginning of the period or by the evolution of dispatch winch to (the earliest scraper is composed of two dispatching winch to pull a, but the operation is complex, so our technicians the drawworks was changed to double drum and reversible operation. )

电耙,电耙照片,电耙绞车,扒煤机,扒矿机,耙矿绞车

Working principle of Scraperwinch winch:

Scraperwinch, coal scraper, scraper winch, sand scraper, can station operated in close proximity, also can use a few meters away from the winch to tens of metres with a button to implement remote control distance operation. 2jpb-15kw rake mine winch mainly used horizontal rake, also can be used for inclined angle of not more than 44 degrees of the slope rake, can not be used as the lifting equipment is mainly used for horizontal rake. We can use it to distant slag, ore, and other soft material rake take to the front to do the task of loading, commonly used in coal mine, phosphate, lead-zinc, copper, etc. mine is currently mining area will be lack of handling equipment.

After the Scraperwinch motor starts, the gear and the gear box are connected through a two stage reduction, which drives the main shaft to drive, and the two planet gear speed reducer is driven by the gear. When the internal gear is not stopped, can rotate freely, the main and auxiliary drum does not turn on the scraper bucket and rope resistance. If you press the right control handle, make the right inner gear brakes, master reel cylinder with the corresponding in the planetary gear and Samsung frame are driven by rotation twine, drag scraper. The auxiliary drum is under the traction of the wire rope. Loosen the right hand to press the left, came to a halt on the left side of the gear, and the corresponding auxiliary winding drum in the planetary gear and Samsung rack drives the rotating rope wrapped around, drag scraper quick return, the main drum is in wire rope traction rope decentralization. Alternately press, Panasonic left and right hand, the rake bucket for reciprocating motion to complete the work of the scraper. More details on MuckingLoader Chinese network: www.pazhaji.com

Scraperwinch parameter

Scraperwinch use note:           
A, the use must be carefully read the "manual";           
B, the length of the wire rope should be in the end position of the trailing bucket, the wire rope to stay on the reel is not less than 3;    
C, winch as sealing device to keep intact, in order to avoid sand particles into the machine, accelerate the mechanical wear and tear;     

D, after the motor is started, no two control handle is pressed at the same time;           
E, often check the lubricating parts, such as oil leakage, lack of oil, should be repaired in time and filling up;           
F, winch, the normal work of 1300~1600, should be repaired once;           
G, drum slot winding wire rope can not exceed the rim.           
H, winch before leaving the factory has been added to the lubricating oil, do not need to be added before use, the normal operation of 120 hours after the replacement of a lubricating oil.

About Scraperwinch maintenance and after sales:

New Scraperwinch to buy back to after the first thing is installed first, after installation to like Scraperwinch deceleration box raise a lot of gear oil, gear oil can not add a little, also can not gado gado will lead to gear oil overflow, or lead to ran to the drum gear ring gear oil above lead to brake not to live. With less gear will lead to lack of oil and gas damage, therefore must be in accordance with the oil level line to add). Usually use the need to pay attention not to let the wire rope always in the direction of the wheel of a place to wear while, from time to time can be a location, so that can reduce the consumption of wearing parts. Gear oil is replaced once every 3 months, at any time to check the wear of the brake belt. Those who buy my company's Scraperwinch, rake mine winch, scraper, scraper bucket machine, a year of uniform protection for if, welcome new and old customers come to buy.