切换:中文

Si Chuan RuiDiTong Construction Machinery CO.,LTD扒渣机 耙斗机 电耙子 四不像 四不像矿车 专业制造

Home > Product > MuckingLoader Tunnel MuckingLoader

MuckingLoader Tunnel MuckingLoader

Loaders and tunnels are the preferred loading equipment for loading and discharging slag in mine tunnels with high loading efficiency.

MuckingLoader, the loader is a code for tunnel loading machinery. The machine can be loaded in the mine tunnel, and the loading efficiency is not low. According to the size of the model, it can load 60 cubic meters to 220 cubic meters per hour. The loading efficiency can be more than that of a loader under certain conditions or conditions. At present, the main types of Mucking Loader produced and sold by our company are belt-type Mucking Loader, scraper-type Mucking Loader and caterpillar-type Mucking Loader. Users and builders can choose the corresponding product models according to their tunnel actual conditions. The belt dredger has the most sales volume because of its low price. The scraper Mucking Loader has a longer life and less maintenance than the belt Mucking Loader, while the crawler Mucking Loader has the highest life and preservation rate among the series Mucking Loaders.

扒渣机_扒渣机厂家

The 80 type scraper MuckingLoader, single strand bar is suitable for loading operation of metal mine tunnel.

The scraper-type Mucking Loader is mainly divided into 60 and 80 types. The 60 type is suitable for use in tunnels of 2.2 *2.2-2.6 *2.6, and the 80 type is suitable for use in tunnels of about 3 meters. Scraper-type Mucking Loader is more suitable for use in tunnels with water and metal mines, thus avoiding the loss of belt and guide wheel. The time and cost of changing the wearing parts are saved. In view of the current market situation, the hedge ratio of scraper MuckingLoader is higher. This series of Mucking Loader can be matched with single cylinder diesel engine power, mainly used to assist walking, no need to go where inconvenient.

扒渣机_扒渣机厂家

80轮式刮板扒渣机准备装车

When we use MuckingLoader, we must first pass the training of the manufacturer or the person who operated MuckingLoader. We can't use it blindly. For some people, it's easy to operate and difficult to maintain. In fact, a real driver not only knows how to operate, but also knows how to maintain and repair.

扒渣机_扒渣机厂家

60小刮板扒渣机准备装车

In our MuckingLoader's on-board bag, there are instructions on how to maintain and when to maintain, so the operator must read the instructions carefully when using how to maintain and how to troubleshoot. Our company produces and sells scraper slag picker with four-wheel box type and axle type (transmission shaft). Compared with the four-wheel type, the failure rate of the four-wheel type is low, the price is high, the axle type is cheap, but the chassis has the possibility of maintenance. No matter which Mucking Loader is, as long as the model is the same, the amount of Scraping Slag per hour is almost the same, and then we need to keep pace with the slag truck. It is suggested that we choose the mine dump truck sold by our company - four unlike the truck to cooperate with Mucking Loader slag.

Main product:我们主要生产销售:扒渣机,耙斗装岩机,耙矿绞车,电耙子,四不像,四不像矿车,矿用四轮车,柴油四轮车,调度提升绞车,小型装载机,铲车。 If you need above products,pls call our hot-wire telephone.

18030527037

Copyright © pazhaji.com 2009 Chengdu RuiDiTong Construction Machinery CO.,LTD
蜀ICP备18025132号Home | About Us | Contact | 中文

分享到: